Post for UCCNC errors

[Anonymous]

I am trying to general code in F360 for my i2r cnc router. It uses UCCNC software. I get the attached error.

Information: Configuration: UCCNC
Information: Vendor: UCCNC
Information: Posting intermediate data to 'C:\Users\Ron\Desktop\1001.nc'
Information: Total number of warnings: 1
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Monday, February 03, 2020 2:16:56 AM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.55.0 0
Configuration path: C:\Users\Ron\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts\uccnc.cps
Security level: 1000
Include paths: C:\Users\Ron\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
Configuration modification date: Monday, February 03, 2020 12:31:51 AM
Output path: C:\Users\Ron\Desktop\1001.nc
Checksum of intermediate NC data: ca44f1be2a72c7111f25ebe415f08643
Checksum of configuration: cf35a9a127d14f5643ec31ad2fa88f5d
Vendor url: http://www.cncdrive.com/
Legal: Copyright (C) 2012-2018 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.7421
...
Warning: Work offset has not been specified. Using G54 as WCS.

###############################################################################
Error: Length offset out of range.
Error at line: 740
Error in operation: '2D Pocket1'
Failed while processing onSection() for record 405.
###############################################################################

Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Monday, February 03, 2020 2:16:56 AM
Post processing failed.

[boopathi.sivakumar · Accepted solution]

@Anonymous 

make sure your tool length offset number less than 99

Edit the tool and go to post processor and change the tool length offset number less than 99

[Anonymous]

That fixed it. Does the value have any effect on my machine? Thank you very much for the prompt response.