Hi all.
I'm having a problem with the Okuma Multus B300IIw post.
I'm using it on a machine that doesn't support TCP and doesn't use M960 to control the C-axis direction.
The problem is that from C359.999, it doesn't move 0.001 to 0, but instead rotates again, which causes marks on the part.
M15
X28.274 Y-2.503 Z-27.058
X28.265 Y-2.548 Z-27.106
X28.255 Y-2.594 Z-27.154 C359.999
X28.245 Y-2.636 Z-27.205
X28.234 Y-2.68 Z-27.254
X28.223 Y-2.721 Z-27.306
X28.211 Y-2.761 Z-27.358
X28.199 Y-2.802 Z-27.409
X28.186 Y-2.839 Z-27.464
X28.173 Y-2.878 Z-27.517
X28.159 Y-2.915 Z-27.572
X28.145 Y-2.95 Z-27.628 C0.
X28.13 Y-2.987 Z-27.683
M16
X28.114 Y-3.019 Z-27.74 C359.999
X28.099 Y-3.052 Z-27.797 C0. (wrong direction)
X28.082 Y-3.086 Z-27.854 C359.999
X28.065 Y-3.115 Z-27.914 C0.
