Community
HSM Post Processor Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Modify Fusion 360 Hurco Post Processor

1 REPLY 1
Reply
Message 1 of 2
AllFyve
82 Views, 1 Reply

Modify Fusion 360 Hurco Post Processor

Two Fusion 360 Hurco posts. Left image with machine selected right image without. I would like to post with machine selected but I need to tweak the post. I would like the highlighted area on the left to be like the highlighted area on the right. Hope this makes sense.

 

Thanks Charles!

 

 Hurco Post With Machine.PNGHurco Post Without Machine.PNG

1 REPLY 1
Message 2 of 2
CNC_Lee
in reply to: AllFyve

@AllFyve 

If the generic posts do not provide the required output, I offer post processor development services and happy to work out a solution for your machine! Please message me if further assistance is needed.

If my post answers your question, please use Accept as Solution.

CNC Lee
Autodesk CAM Post Processor Expert
https://linktr.ee/cnclee

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report