Looking For a Post Processor for SWI Proto Trak MX3

[LocalMachiningCompany]

Hi guys,

I am looking for a post processor that works for the proto trak MX3. I have taken the .gcd one that is in the Fusion library and have made some edits to it, but I am hoping that maybe someone else has already done this and might be willing to share what they have. Thank you in advance for any help you are able to provide!

[boopathi.sivakumar]

Hi @LocalMachiningCompany 

What are the changes you are looking for in the post?

Could you be more specific on the post what is not working and you have manual for it?

[LocalMachiningCompany]

Hello, Thank you for your response. 

I tried using the .MX2 conversational post that is in the Fusion library for SWI Proto Trak machines. 

The controller I am using is an MX3 and so it only accepts programs with an .mx3 extension. I did change the extension in the post so that it would output .mx3. When I post code, everything looks correct in the Program Previewer, but when I send the code to the controller all the Z heights are off. They usually just end up reading whatever is in the Y value. I attached the only manual I could find for the MX3 controller. 

Please let me know if there is anything else I can provide to help with the situation!

-Don