Looking for a Post Processor for NC-Hops

[jstricklandZKXDP]

We're in the midst of negotiations on purchasing a Holzher 7018 and we're looking for a Post for NC-Hops (.hops) format files for Fusion, thanks

[AdamKunzo]

I'm not sure if a generic post will be available for this machine. Do you have a sample code from the machine supplier that we could review to make a recommendation?

It’s likely that some modifications to the post processors will be necessary. If you need assistance with this, feel free to message me, and I can offer a custom post processor modification tailored to your machine.

---
If my response answers your question, please use Accept Solution button.

[jstricklandZKXDP]

this is what the vendor sent me, it doesn't look terribly complicated but keep in mind this is only line boring, I don't know what contours look like in this format

also had to change the extension to upload cause .hop isn't allowed but .ass is apparently ok lol 

[Marek_Skotak]

Hi, i developed it few years before with a many customers integration around a world.  Check this. https://www.youtube.com/watch?v=kouhE_1Zad0

[rajis.kataria]

Hi Marek,

Please let me know how I could about integrating this, also, any way to try it out. For a Biesse Rover A 5axis

Many thanks