LinuxCNC - 5 axis continous - Swarf operation

[Anonymous]

Hi! I work with a 5 axis CNC machine with LinuxCNC and I have a problem with the SWARF operation in post processor.

When I use Swarf operation in a face, Post Processor (LinuxCNC) change Y axis with X axis.

I attached two image to describe the problem. 

In the first one there is the Swarf operation in the correct face, but in the other image (the toolpath simulator) you can see that the operation is incorrect direction.

How can I risolve it?

Thank you!

[Laurens-3DTechDraw · Accepted solution]

Is your LinuxCNC configured for TCP?

[Anonymous]

Yes!

[Anonymous]

I've changed

optimizeMachineAngles2(1); // TCP enabled

in

optimizeMachineAngles2(0); // TCP enabled

and it works! Thank you!