Is there a post processor for flow waterjet

[Anonymous]

Wondering how to post in fusion 360 to our flow water jet with out saving as dxf and uploading into flow path. Would like to do mostly everything right in 360. The flow water jet uses an .ord file.

[CNC_Lee]

@weibpegasus @kiko_lobo @dcpanzone 

If the generic posts are not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Message me if I can be of further assistance.

[nateBNP6V]

For whomever is still following this topic, I've just done some troubleshooting and have developed a workaround to this issue.  If you set the retract height to any value above zero, the traversal lines will translate properly to the .ord cut file.  This behavior of the z retracting between pierces is different from the way the flow programs handle traversals, but it is a minor annoyance.

[curtis_emerick]

Hi Kyle,

Do you happen to have the updated post the corrects the location of the on/off commands?  

Regards.

[jtsL9RRS]

Hello,  I am also looking for the most recent version