CTX 500 Gildemeister post?
Coras Alin wrote:
Does somebody have CTX 500 post or any other CTX post from Gildemeister?
Heidenhain or Siemens?
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
In that case: https://camforum.autodesk.com/index.php?topic=6862.msg29376#msg29376
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
Coras Alin wrote:
i saw it's not siemens and i don't know what it is Eltro Pilot its the old machine says. I have some gcodes from a programm below.
http://postimg.org/image/fbqvqoghp/
http://postimg.org/image/x32i54vwd/
http://postimg.org/image/lo610ijjx/
Oh well.
That's an "old heidenhain". Actually it's somewhere in between Phillips and Heidenhain and called Grundig Eltro Pilot.
Is it a machine with or without driven tools?
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
Coras Alin wrote:
it is an automatic turning machine, i dont know what means "driven tools"
Yes,
I know the machine.
But as an option you can have driven tools, also called live tooling or milling tools.
It's for drilling and milling on a lathe.
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
Coras Alin wrote:
no it hasn't any milling or form tools and it can t do any milling operation, just drilling with peck cycles, the tools we fix in slots are stationary and just the clamping jaws rotates.
We have had such a machine(CTX 400E) but that was sold quickly but I'll have a look if I can dig the post up.
Do you already have the machine or did you just go to have a look?
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
Coras Alin wrote:
i already have it and the operators programm straight on it like drawing everythink and the machine generates, its like a conversational programming.
Ahaa,
But you want to program it in Inventor HSM now?
Laurens Wijnschenk
3DTechDraw
AutoDesk CAM user & Post editor.
René for Legend.
