Community
Fusion Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion (formerly Fusion 360) issues here and get support from the community as well as the Fusion team.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

What is the optimal CAM strategy for this project?

1 REPLY 1
Reply
Message 1 of 2
Seanlasater
65 Views, 1 Reply

What is the optimal CAM strategy for this project?

PLEASE HELP!

I am trying to cut out the 3mm sunken portion of the body. Thank you to anyone who offers help!

 

Holy crap. I'm beyond fed up with CAM in fusion. I've spent so much time trying to cut a simple single depth, flat pocket I could have 3D printed a jig and routed this by hand by now. PLEASE HELP!

 

So far I have an engraving on the inner and outer edges in hopes I can cut this to prepare for in inlay and cannot figure out how to cut this pocket. The closest I've come is a 2D cut that zig zags against the straight lines of the model for some reason, always cutting outside of the pocket. I have tried just about every 2D and 3D strategy. I've cut an entire guitar body but can't figure out an optimal strategy for this.

 

Tags (3)
Labels (3)
1 REPLY 1
Message 2 of 2
Seanlasater
in reply to: Seanlasater

I can't delete my own reply? 😐

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report