Community
Fusion Support
Report issues, bugs, and or unexpected behaviors you’re seeing. Share Fusion (formerly Fusion 360) issues here and get support from the community as well as the Fusion team.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Text Extrusion not working in Fusion

8 REPLIES 8
SOLVED
Reply
Message 1 of 9
zohrabyan
300 Views, 8 Replies

Text Extrusion not working in Fusion

Hello everyone

This issue/bug or problem is still persisting in my program. The text extrusion is not working, or it does but inconsistently, some parts it works, on some parts doesn't work. Has the issue been reported to side support engineering team=? why since last year it has not been resolved? here is the screenshot of the error, it reports nothing more than "cannot complete the extrusion".

 

zohrabyan_0-1688901456021.png

 

8 REPLIES 8
Message 2 of 9
g-andresen
in reply to: zohrabyan

Hi,

1. did you try „emboss“ instead of extrusion?

2. Please share a sample file

 

File > export > save as f3d on local drive > attach to post

 

günther

Message 3 of 9
jhackney1972
in reply to: zohrabyan

Some fonts will not work because of their structure but a lot will work.  If you use Ariel font, I will bet it works every time.  Your can also try and edit the sketch and Explode the text.


"If you find my answer solved your question, please select the Accept Solution icon"

John Hackney
Retired

Beyond the Drafting Board


Message 4 of 9
zohrabyan
in reply to: zohrabyan

well, is there any way to know what are the causes of this issue? because Its not possible  restrict work to use only "arial" or "times new roman" but mostly I am working with custom fonts. So I don't think that I found a solution. Below is the files as requested.

 

 

Message 5 of 9
g-andresen
in reply to: zohrabyan

Hi,

Since I don't have the font installed, I can't check it.
Go to the sketch and convert (Rightclick "Explode") the font to vectors or tell what font it is.

 

günther

Message 6 of 9
zohrabyan
in reply to: zohrabyan

Hello Günther,

Here is the mentioned font, you can try to install it and then try to extrude it on the black ABS plastic part on the side of the enclosure, as you can see from the screenshot in very first post of mine, that exactly where the issue is.

 

Dave

Message 7 of 9
zohrabyan
in reply to: zohrabyan

Message 8 of 9
g-andresen
in reply to: zohrabyan

Hi,

In Fusion, conversion to paths was not possible and Inkscape also refuses.
In the end, I first sketched the text in V-Carve and exported it as DXF.
The extrusion in Fusion was successful.
You may have to scale the contours.

 

günther

Message 9 of 9
zohrabyan
in reply to: zohrabyan

imported into fusion and it works, thank you Günther, for you kind assistance.

Will try to follow your path in the post above, i hope.

 

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums