Suggestion Needed to delete faces.

[smahmu10]

Hi,

I want to remove the internal connected portion between the nanochannel and microchannel. Can you please help me in this regards how can I do that? The fusion file is attached herewith.

Thanks.

[smahmu10]

Hi,

I need some suggestion...I want to delete an internal face between two combine structure. Can you please help me in this regards?

[jeff_strater]

@smahmu10 - can you share the model here?  It's hard to tell from the image, but it looks like these are different solid bodies - if all you want to do is join them, use Combine.

[jhackney1972]

Being your first post, if you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save to your hard drive. Then use the Attachments section of a forum post to attach it.

[smahmu10]

https://forums.autodesk.com/t5/fusion-360-support/suggestion-needed/td-p/10399550

Hi, Thanks for the suggestion.

I posted a new post. Please kindly see and give me some feedback.

[daniel_lyall]

You do not need to delete them they need to be extended by a little bit so they touch body 6 then do a combine to join them the other end just needs a combine join done to it.

[smahmu10]

Hi,

Is it possible for you to show me one how to do that by sharing a video?

I am a new one in Fusion 360 so struggling a lot to do that.

However, if you can't that's totally fine. Thanks for the suggestion.

[jeff_strater · Accepted solution]

this is one way.  

[daniel_lyall · Accepted solution]

Here you go

[smahmu10]

Thanks a lot for the demonstration!! It solved my problem...I am a new one in this field and struggling a lot with this from a few days....Thanks for your help and time. It means a lot.

[smahmu10]

Thanks a lot for the demonstration!! It solved my problem...I am a new one in this field and struggling a lot with this from a few days....Thanks for your help and time. It means a lot.