Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

STL to STP file post OCT 1

Anonymous

STL to STP file post OCT 1

Anonymous
Not applicable

Hi all! I was wondering what the process for changing a STL file to STP file. If that can be done. My Google foo keeps producing instruction from 2019. There is a Mesh to BREP but can't find the Mesh button in Modifiy section. Anyways maybe a link to a current instruction. So what I have tried was inserting MESH in to F360 then exporting it as a STP file to desktop. Which it does, but F360 its fails to Upload it as a step file I get a error. It doesn't complete the Upload it status "Failed " and leaves a translation report. Which doesn't make sense to me. So maybe can't be done on free license I Have. Thanks! Corey

0 Likes
Reply
Accepted solutions (2)
422 Views
2 Replies
Replies (2)

jhackney1972
Consultant
Consultant
Accepted solution

follow the Screencast.

 

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

0 Likes

Anonymous
Not applicable
Accepted solution

Ok thanks! That worked problem was that every time I used the "Insert Mesh" in the  drop down there would be no "Mesh" command in tool bar. When you use the "Open" in the file menu like video then it would produce the "Mesh" command in the tool bar. So I was using the Command on the tool bar even after I saw the video. It took me acouple of try's but thanks for the help. CoreyInkedNo Mesh_LI.jpg

0 Likes