Silver sketchs that have been extruded don't show up in slicer

[w.luke.baker]

Wanted to see if anyone could help me with an issue I am running into on fusion 360, I am having trouble extruding a couple of Items I am trying to put on a build I am doing. It appears the extrusions that do work and show up in my slicer are olive green, however the silver/grey ones show they are extruded on the 3d model in fusion but they do not show up in the slicer when trying to print. Any help or a direction I should look would be greatly appreciated. I can’t seem to word it right in my searching/research to come up with the correct answers I am in need of to solve this.

[seth.madore]

Could you share your Fusion file?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

[w.luke.baker]

Please see attached, let me know if that worked.

[w.luke.baker]

It doesn't appear to be showing up in this exported file, let me try the whole thing, its just kind of large.  Please excuse the 'art'.  I am not a company and am not trying to distribute these files, this is for educational purposes only.

[seth.madore · Accepted solution]

I suspect that this is due to the fact that they are separate bodies from the main component. Because you did all of this with the Design History turned off (cough @TheCADWhisperer ) it's going to be a bit of time to rework this and get them incorporated into the model. When you DO the Extrude, you want to select "Join"

 

[w.luke.baker]

oh jeez, I guess that would help.. lol.  Well thank you very much for your help on that, I am definitely still learning this by teaching myself, I guess this is where that can go wrong.  Again thank you very much.

[w.luke.baker]

That fixed it, thanks again for your help.