"Error in calculating circle defined by 3 points. The points must be unique."

[rebeccah_luttrell]

Hi all, 

I'm exporting a body using Shaper Utilities. But I'm getting the message "Error in calculating circle defined by 3 points. The points must be unique." and I have no idea what it means or what it's asking me to do. I made a sketch and extruded the sketch to make a body. Now when I go to Shaper Utilities and try to export the face of that body, it gives me that error. I've checked my constraints and to make sure everything is Kosher, but nothing. 

Any help would be appreciated. Thank you!

Rebeccah 

[g-andresen]

Hi,

please share the file

File > export > save as f3d on local device > attach to next post

günther

[rebeccah_luttrell]

Hi, Okay. I will attach a downloadable public link -> https://a360.co/3w3Hpbj 

Thanks!

[rebeccah_luttrell]

also here is the f3d file you asked for 

[rebeccah_luttrell]

and just to add a note. It's just the Left Panel and Right Panel that cannot export from the Shaper Utilities

[g-andresen]

Hi,

I discovered an area that was probably not planned.
I can't say if that's the problem spot, since I don't work with the SHAPER utilities.
You should make sure to create constraints for horizontal and vertical lines first.

Screencast

günther