Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Problems with motion link

Anonymous

Problems with motion link

Anonymous
Not applicable

Hi!

 

So im quite new, but have tried linking and assembly before without any problems. 

However im designing my first robot from scratch now, and im having trouble getting the motion link to do what i want. 

I have downloaded a servo, and a servo horn from grabcad, and ive constructed a disc in fusion. The servo horn is placed inside the disc. Ive gotten the disc to rotate on the axis of the servo, and the servo horn as well. Both rotational, and working. When i try to apply motion link to this however, i cant get any movement from any of them.

 

Ive noticed that they are moving in opposite direction, but even after correcting this i can get them to move together.

 

 

0 Likes
Reply
Accepted solutions (1)
673 Views
2 Replies
Replies (2)

jhackney1972
Consultant
Consultant
Accepted solution

You whole issue boils down to you having turned on Contact Sets All.  I point this out in the Screencast as well as show you the needed joints to provide the motion your asked for.  A Motion Link is not require, at least at this point, maybe later.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

1 Like

Anonymous
Not applicable

Thank you sir!

 

you are a legend. really appretiate your time and effort. I was pulling my hair out trying to figure out why it didnt work as i would like to. 

0 Likes