Solved: Problem wit exporting files (any format)

Anonymous · ‎09-16-2021

Hi.

I'm having problem exporting a model to STEP format (or any other format ). This issue seems to be valid for this model only and several variants of this model. Other models I have made seems to be working fine.

I have spent half a day working on these models and was ready to export these to my local machine shop so a little annoying 😞 I'm getting a error message when exporting to IPT or STL but when exporting to STEP or IGES I get no error message but nothing happens. I would appricate any help . Thanks!

TheCADWhisperer · ‎09-16-2021

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

(From within Fusion, not your Data Panel.)

HughesTooling · ‎09-16-2021

It could be the "/ " in the file name. There are some restricted characters you can not have in file names.

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Anonymous · ‎09-16-2021

Thanks a lot Mark that saved my day. I renamed the file and left the sign "/" out and it works perfectly 🙂