Solved: Interference tool no longer seems to work with latest update

bwasserman1 · ‎12-10-2023

I recently used F360 to engineer a few parts that nest inside each other. When I used the interference check it shows the two bodies but no interference is highlighted. I then forced interference but again no interference was shown

jhackney1972 · ‎12-10-2023

Seems to work OK for me. You do remember you must select the Compute Icon.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

bwasserman1 · ‎12-10-2023

Yes I did. I have used it many times before.

jhackney1972 · ‎12-10-2023

As you can see in my animation, it works fine. You may want to consider using the Repair function in the Fusion 360 Service Utilities.

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

bwasserman1 · ‎12-10-2023

I will try that.

Thank you

TheCADWhisperer · ‎12-10-2023

@bwasserman1

Can you Attach a simple dummy file here that exhibits this behavior on your machine?

bwasserman1 · ‎12-11-2023

Not sure whats going on, but this morning its working fine.

Thank you

ron · ‎03-05-2024

I am using AutoCad 2015 and the interference check box does not appear and I can not pan around the interference.

g-andresen · ‎03-05-2024

Hi,

@ron wrote:

I am using AutoCad 2015 and the interference check box does not appear and I can not pan around the interference.

You are in Fusion forum.

günther