How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

[pdjXU638]

How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

[davebYYPCU]

Plane on Angle, at 45 deg

Sketch centre points.

Use Hole Tool from sketch Plane.

Might help....

[pdjXU638]

I am new to Fusion so some of the instructions are not clear. Is there a
video that shows this?
Also, how can I cut out a hole or profile on the side of a box?
Thanks

[davebYYPCU]

What I said.

Might help....

[pdjXU638]

Thank you for your help.

If anyone else could add more that would be great!

Thanks again

[g-andresen]

Hi,

Please share the file.

File > export > save as f3d on local drive  > attach to post.

günther

[pdjXU638]

This comes from tinkercad.

I would like to drill B at 45 C at 45 around the block as a demo.

I do not have holes drawn in the sides yet.

But I will need to carve shapes in the sides as well. But I do see how
to do this.

Thanks

[davebYYPCU]

File from Tinkercad is STL format.

My suggestion does not work for your (missing) file format.

Might help....

[g-andresen]

Hi,

Please provide at least pictures for a better understanding.

Günther

[pdjXU638]

Here is the file converted to fusion.

What I need is a visual on how to drill the 4 corners at B 45 C45. I
just want to located the 4 corners, so it does not need to drill deep.

I am looking for a way to verify the setup. Not sure if fusion can do
this, I cannot find a video that shows this.

If you know of one please let me know.

Thanks

[davebYYPCU]

No file.

[pdjXU638]

Here it is

[jhackney1972]

No file again.  You cannot attach files from an email link, you have to come to the Forum and Attach them to a post.

[pdjXU638]

Oh

[g-andresen · Accepted solution]

Hi,

Is that what you want to achieve?

günther

[pdjXU638]

yes, that's it!
No speech, I am new to fusion so explaining what you are doing in the
video would help me a lot!

Thanks!

[g-andresen · Accepted solution]

Hi,

---

@pdjXU638 wrote:
yes, that's it!
No speech, I am new to fusion so explaining what you are doing in the
video would help me a lot!

---

Follow screencast and timeline.

1. create a diagonal
2. insert a plane on the path at the start/end point of this diagonal
3. this plane takes up the sketch for the hole and the countersink and ...
4. ... forms the basis for an offset plane, which is required for drilling a hole along the diagonal and also for the subsequent countersink
5. drilling and countersinking are transferred to the 4 corners in a circular pattern

[pdjXU638]

3 Thumbs Up!!!
This gives me a great head start!
Thank you very much