How to create a 3D hollow pipe in a solid ?

[gddsouza]

Hello,

I need to create a 3D hollow pipe inside a solid as shown in the attachments, I tried using the below options but nothing worked:

1. Sweep option: but it was showing an error, i tried guide rail as well but didn't work (pls see attachment)
2. Pipe option: showing an error as well, tried with/ without chain selection (pls see attachment)

kindly help here!

[davebYYPCU · Accepted solution]

White Points at intersections, usually means there are not connected to the standard Fusion requires.

Make end points coincident, and both Tools should work.

Blue articles and white points in a finished sketch, is not recommended.

Might help....

[jhackney1972]

If you have a fully constrained sketch with all your path sketches joined, you can guarantee either the Pipe or the Sweep command will work.   Model is attached.

Please attach your model next time for a quicker and more relevant answer using your work, not ours.

[gddsouza]

hello,

thankyou somuch! its working!

[gddsouza]

HELLO!

thanyou somuch for the video, help me a lot!

br

Glenn