Hello, I have a NGC Haas mill with a TRT160 5axis on it

[FacebookGroupMember]

Hello,
I have a NGC Haas mill with a TRT160 5axis on it.

/

I downloaded the fusion 360 post processor HAAS - Next Generation Control
/
I enabled the A and C axis in the post processor as per my machine.
/
When I try to use it, it gives me an instant error as soon as the 5 axis turns into position.
/
The error code i get on the screen is 2019 Incompatible Tool Length Offset Used.
/
The errors at line N70.
/
The tool is probed and there is tons of clearance in all axis...
/
%

O01001

(Using high feed G1 F5000. instead of G0.)

(T7 D=0.49 CR=0. - thread mill)

(T8 D=0.625 CR=0.03 - bullnose end mill)

N10 G90 G17

N15 G20

N20 M31

N25 G53 G0 Z0.

(2D Adaptive2)

N30 T8 M6

(0)

N35 S8000 M3

N40 G54

N45 M11

N50 M13

N55 G0 A-90. C180.

N60 M10

N65 M12

N70 G254

N75 M8

N80 G0 X0.7393 Y2.3812

N85 G43 Z1.225 H8

N90 T7

N95 G0 Z0.6637

N100 G1 Z0.585 F60.

N105 G3 X0.6834 Y1.9925 I1.7658 J-0.4523

N110 G1 Y1.9781 F50.

N115 X0.6816 Y1.9639

N120 X0.6781 Y1.95

N125 X0.6729 Y1.9366

N130 X0.6592 Y1.9113

N135 G3 X0.5992 Y1.7949 I0.2556 J-0.2055

N140 X0.5814 Y1.7046 I0.4806 J-0.1412

N145 X0.5769 Y1.5968 I0.7648 J-0.0866

N150 X0.5882 Y1.4531 I1.2432 J0.0257

N155 X0.6187 Y1.2773 I2.1519 J0.2828

N160 X0.6426 Y1.1698 I4.4609 J0.9376

N165 G2 X0.6667 Y1.0575 I-3.3543 J-0.7773

N170 X0.6842 Y0.9441 I-1.4846 J-0.2874

N175 G1 X0.6871 Y0.9155

[FacebookGroupMember]

But when the error pup-up the controller as read the 2 or 3 lignes further, I don't see what's wrong with the G43? Maybe it as no value?

[FacebookGroupMember]

I don't understand either.

It seems to move the 5 axis trunnion into position, but then alarms out.

That said.. I think I noticed that the 5 axis trunnion is rotating way more complicated than it needs to.

perhaps the face which is supposed to be presented towards the spindle (z axis)
is upside down and thus its saying incompatible tool length, because the tool can't reach from underneath?

Not sure why that would be happening though

[FacebookGroupMember]

Samuel Lockhart I wouldn't think so, machine doesn't know it's upside down, what does the G187 means?

[FacebookGroupMember]

Julien Charest-Lacombe G187 Setting the Smoothness Level (Group 00)

[FacebookGroupMember]

Samuel Lockhart oh ok,I can't see what is the error, sorry.

[FacebookGroupMember]

Samuel Lockhart https://staging-diy.haascnc.com/g254-dynamic-work-offset-dwo-group-23-1 you might find something there, From what I see it should call a position right after the G254.

[FacebookGroupMember]

Julien Charest-Lacombe yes i saw that from Haas too! but how would fusion have a specific post already, but not have it right??? lol

[FacebookGroupMember]

Samuel Lockhart you can modifie the post as you need it, there is some good instruction on Autodesk website or on Google, I managed to modify one for a Mori-seiki, it took me a complete day to understand it. If you take that road, don't forget the save as the post in a other name and modify to new one...

[FacebookGroupMember]

Julien Charest-Lacombe the problem was the 5 axis rotary was hard coded in the post to only rotate 30 degree per side or something.

My unit does 120 degree per side.

That change fixed it

[FacebookGroupMember]

Samuel Lockhart nice!!