Fusion opening design/part as "v0" - makes the file uneditable

thomasQSSM3 · ‎12-13-2022

Any advice for this issue?

Noticed there are some parts or designs that are fully assembled and titled and can be open by other members of my team. However, when I open them it opens as a file titled v0 and then does not save any changes I make to it.

Thanks

sutherland- · ‎12-13-2022

Hi @thomasQSSM3

Is your F360 up to date?

Have you tried to log-out and log back in after PC restart? Have you tried to manually re-install F360?

Please click on Accept Solution so other community members can see how to solve the issue.
Also, consider giving a Like to the comments that you feel helped you.

Best regards,

sutherland-

thomasQSSM3 · ‎12-13-2022

Running latest version and full reinstall and restart has been attempted to resolve but no change

sutherland- · ‎12-13-2022

Please try to perform a manual uninstall.

Please click on Accept Solution so other community members can see how to solve the issue.
Also, consider giving a Like to the comments that you feel helped you.

Best regards,

sutherland-

thomasQSSM3 · ‎12-13-2022

As previously mentioned this has been done.

sutherland- · ‎12-13-2022

Have you tried to log in from other devices?

My best guess would be to contact customer support as it is a really odd behavior.

Please click on Accept Solution so other community members can see how to solve the issue.
Also, consider giving a Like to the comments that you feel helped you.

Best regards,

sutherland-