F360 unable to solve simple Isosceles Triangle

[Cheesecannon25]

Using Parametric Design in a sketch, I cannot set the base of an Isosceles Triangle (given angle) to the result of a function parameter

[davebYYPCU]

Red text usually boils down to incompatible units.

[Cheesecannon25]

It's in mm, so that shouldn't be the issue

[davebYYPCU]

Given Angle and MM,

I’ll let you work out why it’s not working.

[MoshiurRashid]

Hello

Thanks for posting. Please check some things in your file.
1. The parameter is set in the equation command.

2. The value of the parameter is not high or low enough to violate another value.

If there is still a problem. Please upload the f3d file here so that we can check it.

(files> export> f3d)

[Cheesecannon25]

The resulting value is 30mm, which works perfectly when plugged in manually (and, theoretically, any value should work). Sending f3d file.

[Cheesecannon25]

It seems I used the wrong function parameter, and it works fine now