Fusion
The dot is correct the lower section wont engrave the outer profile. Can anyone please help me out with a hint to fix this?
Please attach your model so the forum users can take a look at it. To attach your file, open it in Fusion 360, select the File menu, then Export and save it to your hard drive. Then attach in to a forum post using the Attachments section.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I played with it quite awhile and had no luck. Maybe @seth.madore might be able to give you some ideas.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I'm not having any luck with this. There must be something about the sketch that it's not liking at all. The thing is, it does appear to be fully complete, as we can extrude without issue. I'm sending this up the chain, I've opened up CAM-23890 to investigate.
As a workaround, it MAY be possible to redraw this with less segments (use larger 3-point arcs) and have success
Seth Madore
Customer Advocacy Manager - Manufacturing
