Exporting issues with Prusa Slicer

[karuthTGNHA]

When I want to export some mesh from Fusion360 to the prusa slicer application, it correctly opens prusa slicer and make the part slicable. However when PrusaSlicer is already open and I want to export more parts to the print surface to be sliced, it stops working. I.e. I can export one part but not several parts directly to prusa slicer, and when the application is already open, well nothing works. Of course I can also export and then import, but compared to the previously possible shortcut that's really inconvienient. 

[flamingfireball361]

having the same problem

[gniewko248]

Same here. It happened during last update. Any ETA for a fix? 

[seth.madore]

Thanks for reporting this issue. We do have a ticket open to work on this: FUS-171507 and hope to get a fix out as soon as is feasible

I'm assuming that you are all on a Mac OS? Or are there PC users who are also running into this?

[avarbeckley]

I have the same issue and I am on Mac OS. Issue happened in Sonoma 14, and continued to happen when I updated to Mac OS 15 Sequoia. 

[thorsten5YH47]

I´m also having te same issue since the workflow for "3dPrint" has changed:

On my side you can set everything and even click "OK", but the data does not arrive at Prusa Slicer.

Im runninbg MAC OS Ventura.

Greets, Thorsten

[bjfwaldron]

I have the same issue.  Mac OS Sonoma, M2.  Occurred when I updated to the most recent Fusion 360 version.

My issue is the same as above - If Prusa Slicer is not open the model is transferred OK.  If Prusa slicer is open, no model transfer appears to occur.

[thespencerowen]

I'm also on OSX Sequoia and this started happening with both BambuSlicer and Prusa Slicer. I've also tried choosing a 'custom' export and manually choosing the BambuSlicer location with no luck.

I've tried installing BambuSlicer from both .dmg file and from home-brew with the same result.

The only work around I've found is to export to disk then manually import into the slicer.

[rgovostes]

A small request to the team while fixing this issue: The "Save as Mesh" panel always defaults to "Export", which takes extra clicks to send to the external slicer program. This is a regression from the previous release where I could go from Fusion -> slicer in two clicks. Can you please have the panel remember the last "preparation type" selection?

Edit: already discussed here 

[spadrille]

I agree with this request. Please let us choose the default Save as mesh mode. 

[vzr83hxymj]

I have the same issue on latest Fusion on MacOS Sonoma and Bambu Studio. Started after last update of Fusion.

[normanDC2ER]

I also have this problem with the latest update.  I am on MacOS Sonoma 14.6.1 on Apple M1 chip.

The workflow to "make" completely changed and I cannot export more than one body to PrusaSlicer.  This is a big problem now.

[Bernhard_Fehr]

Same problem for me with Prusa Slicr after update. I'm using a Mac Studio with M2 and Sequoia (15.0). The workflow is broken and the workaround with exporting to disk is very inconvenient.

[patrick6CQRH]

Mac OS15 and Bambu Studio, same issue since the last update. Good to know I'm not alone in this struggle! Hopefully, we'll get a swift solution soon—before I completely lose my mind! 🙂

[g-andresen]

Hi,

@patrick6CQRH ; @Bernhard_Fehr @normanDC2ER , @vzr83hxymj 

Did you realise that there is a ticket (#4).

This means that the problem is being worked on.

günther

[Bernhard_Fehr]

Following the discussion it was not clear for me that the developers are really working on the ticket. But this is good news to hear. Thanks a lot for the information. 😀

Bernhard

[detroitstylz]

Is there a place to track the status of FUS-171507 ? Apologizes I couldn't find a bug report section of the site anywhere.

[rossBD2BB]

Up until the last update I could simply choose 3D print from the file menu and the file would be opened in Bambu Studio ready to slice. No I have to export an STL and use that to open in Bambu Studio. I assume this is the same issue and look forward to the bug fix

[APLATHROP]

Same issue here with the latest updated. SUPER annoying. Glad it's being worked on. 

Also, if you choose PrusaSlicer for the application is there a directory so you can choose the correct application?

[pierre_vialME72S]

Hi, I'm having the same issue. Thanks for solving it!