Here, the splitting tool is unable to find the interference while the interference tool suggests a clear overlap.
Note: I have designed both of these bodies by using "Form" tool. I have given both the bodies thickness, hence they are not 2D Sheets. Kindly help me resolve my issue. I have attached my CAD model.
Thank You
Ok ! so I tested your file on my computer - when I ran the interference it said there was no interference found which is odd because as you demonstrated there was clearly interference! but - I did achieve the result you wanted by unstitching/ offsetting certain faces and essentially turning your model into a surface model then I was able to use the face that is essentially the edge of difference between the two overlapping models! 🙂 then used the trim tool to remove the part you wanted to get rid off and finally I stitched the new shape together and with a long process reached the "Split Body" tool 🙂 🙂 🙂
I will upload a video of me doing it - not the greatest video and I had to record again after my computer crashed because of all these computing - I hope it will help you get where you need but still it seems that there is some bug from the structure of the file 🙂 - maybe it is not a bad thing to know a way around it 🙂 🙂 🙂
here is the final result image
and a video! which unfortunately didn't record any sound (womp) - I didn't record the patching in the end but I am sure you can see from the file I added the history of how it was made 🙂 https://drive.google.com/file/d/1ZP7DZNxEcuhkXsRBDfTt6Jw0vkzbSV59/view?usp=sharingv
Fusion
