Design not opening

Anonymous · ‎04-15-2021

My design is not opening. It shows the error that file is not opening due to missing references. And the pop up opens that fusion cannot perform this operation. Fusion isn't able to open this design at the moment. Please try again later.

I tried many times restarting fusion and computer as well. But still, my design is not opening.

Please help to open my design which is very important project of mine.

dsouzasujay · ‎04-17-2021

Hi @Anonymous ,

Can you please share a snapshot of the error message that you see while opening the file.

Try opening the same file from A360, Share the snapshot of what you see over there.

If you find my answer solved your question, please click the "Accept Solution" button

Sujay D'souza
SQA Manager
Quality Assurance
Autodesk, Inc.

HughesTooling · ‎04-17-2021

If you're using the PC where you created the design, try going offline and open the design, then go back online.

Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

mikeFS5AP · ‎06-01-2021

This worked for me.