Re: Cannot snap to objects when sketching in Fusion 360

Anonymous · ‎07-08-2023

This is the support article for all demotivated users. It can also probably relate to the recovery of applications in some topics. https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Cannot-snap-to-obj...

Also, please follow the related subjects in the:

See Also:
How to wrap a 2D sketch onto a surface in Autodesk Fusion 360
Projected lines
How to project geometry onto a Sketch

TheCADWhisperer · ‎07-08-2023

@Anonymous

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Mash p on your keyboard for Project.

Anonymous · ‎07-09-2023

Yes. I can.

davebYYPCU · ‎07-09-2023

I would consider that model to be finished. What is it you would like to do in that sketch?

P for Project is unlikely to be what you want, (needs a 2d sketch)

Project > Include 3d geometry is for 3d sketches.

Might help....

TheCADWhisperer · ‎07-10-2023

@Anonymous

Examine the Attached file...

Anonymous · ‎07-12-2023

@Anonymous - this post has been edited due to Community Rules & Etiquette violation.

@TheCADWhisperer I could just tell from the screen shot it's a loft.

Anonymous · ‎07-12-2023

@davebYYPCU Can you please make up your mind, if you are actively replying to this post or not?

Anonymous · ‎07-12-2023

@TheCADWhisperer @davebYYPCU

Well, I done this before. Today is July 12, 2023. Let's start this topic again.

How about working out an example for something like this.

Because I already feel like this topic is starting to smell exactly like a mcintosh.

That sounds great. Can you upload a model like that?

Generation-of-geodesic-structures-a-Regular-icosahedron-20-faces-b-f-Geodesic

davebYYPCU · ‎07-12-2023

No.

I have no idea what your question was about.

TheCADWhisperer · ‎07-12-2023

@Anonymous wrote:
@TheCADWhisperer do you speak English dude. Are you stupid?

@Anonymous wrote:
Generation-of-geodesic-structures-a-Regular-icosahedron-20-faces

@Anonymous

Examine the Attached file...

Geometry 101.

Enjoy!

@Anonymous

Edit: I made one mistake that caused not to update with change in dimension. Tomorrow I will post corrected geometry if you don't figure it out.

Anonymous · ‎07-13-2023

@TheCADWhisperer no, bro. 'I'm going to barely snap's.

And, the other five as well. All the way to iso 0.9997

Anonymous · ‎07-13-2023

@TheCADWhisperer just in case you're not familiar with me. I don't want a repeat of the same thing from 2019. Biking and bikinis is my life. How about you do the model? Please. I'm sure it's possible with the law and Balsamic and Vandamme(not the actor)

Anonymous · ‎07-13-2023

@TheCADWhisperer @davebYYPCU By the way who ever reclined the comments according to etiquette is definitely an internet 'troll' and will get banned fired eventually.

Anonymous · ‎07-13-2023

@TheCADWhisperer @davebYYPCU as a matter a fact he won't stand next to a computer for the rest of his miserable amusement

TheCADWhisperer · ‎07-13-2023

@Anonymous wrote:
@TheCADWhisperer just in case you're not familiar with me. I don't want a repeat of the same thing from 2019.

@Anonymous

Do you have a link to the reference?

I must admit that I do not understand your problem description.

Can you elaborate on your issue?

TheCADWhisperer · ‎07-13-2023

@Anonymous wrote:
'I'm going to barely snap's.

What does this mean?

Is English your native language?

If the answer is no, try posting your problem description in your native language and I can use Google Translate.

Anonymous · ‎07-13-2023

@TheCADWhisperer CAN YOU ALSO EXPLAIN WHAT THIS SKETCH IS ALL ABOUT AND WHAT DO THE CONSTRAINS CORESPOND?

Anonymous · ‎07-13-2023

@TheCADWhisperer @davebYYPCU In any case. Today is July 13th 2023. It's Thursday. I really need the 6th Generation of geodesic. Even better if I get all 6 generations. Please.

TheCADWhisperer · ‎07-13-2023

@Anonymous wrote:
@TheCADWhisperer CAN YOU ALSO EXPLAIN WHAT THIS SKETCH IS ALL ABOUT AND WHAT DO THE CONSTRAINS CORESPOND?

Sketch4 is a Polygon

... more specifically a >>Pentagon<<.

It is tied to previous geometry with Coincident constraints.

I made one little mistake in that changing the d1 dimension size the model does not update correctly.

I can fix this if you need for me to show you how. Just let me know if you can't figure it out.

TheCADWhisperer · ‎07-13-2023

@Anonymous wrote:
I would literally slap you into a desk.

I don't understand what this means.

I have never heard that phrase before?

Do you have a picture or link to a reference?