Cannot select body from sketch to extrude

[kennyberndt]

Cans someone coach me on what is going on? Im assuming a setting that unaware of. Its acting like every part of the sketch is open, not allowing me to select a body to extrude. 

[davebYYPCU · Accepted solution]

Fusion chokes on complicated sketches like that.

Edit Sketch then tick Show Profile - required for making solids,

but does not fix the underlying problem, of being an imported sketch.

Error is probably correct, Fusion is overwhelmed trying to find any profile, as it has to butt up to the green outlines.

(Fusion crashed during my workaround.)

Might help....