Solved: Black stock in simulate mode.

TomaszAdamF · ‎04-14-2021

Displayed in simulate mode is solid black since the last change to Fusion stock. Changing material (Ceramic, Mirror, ...) doesn't change anything. It is impossible to observe the milling process. So far it has been green.

I know. The same topic again. But I tried all the advice from other conversations on this subject, and it didn't change anything. Environment, effects, camera, restart Fusion and computer. No change. It is impossible to work without simulate.

The green material disappeared within minutes with the new version of Fusion.

Can you help me turn it off?

HughesTooling · ‎04-14-2021

I had this as well. I found it's only a problem if you have component colour cycling enabled, press Shift+N to disable and it should work as before.

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

TomaszAdamF · ‎04-14-2021

YESSSSSS. Thanks a lot!

Regards

Tomasz

TomaszAdamF · ‎05-25-2021

A few weeks have passed and a newer version of Fusion 360 has appeared. However, it is still necessary to continuously turn off (Shift N) component color cycling to use the simulation. Without it, the material is displayed as a black block in simulation mode.

I was hoping it was just a simple bug and it will be fixed at the earliest opportunity.

Does anyone know that this condition will stay forever?

Regards

Tomasz