Adding Draft gives unexpected result.

[OrvillePirlot]

Hi,

I am changing a model that I made to a client a couple of weeks ago. In that model I used Draft and it worked fined. But I made a minor changes before adding this Draft. And all off a sudden Fusion starts deleting faces.

The change I made is adding another draft in a different direction (See picture).

The Draft that does not work any more is on this plane (green).

This is the result I get now.

I also made a Screencast which you can watch here (because for some reason Screencast does not work on their on forum and Autodesk can't be bothered to fix it): 

https://knowledge.autodesk.com/community/screencast/b629a821-10c7-4644-a1cf-85e2b3e4c32f.

[g-andresen]

Hi,

Please share the file.

File > export > save as f3d on local device  > attach it to the next post.

günther

[OrvillePirlot]

I can not share the files at this moment. They are not my propertie but that of the customer.

[g-andresen]

Hi,

---

@OrvillePirlot wrote:

I can not share the files at this moment. They are not my propertie but that of the customer.

---

Then I wish you good luck with troubleshooting.

günther