Very slow launch of newest version

[everettwcaudle]

I have been happily using Fusion 360 (free version for hobbies etc.) for almost 3 years.  Fusion loaded an update a few weeks ago, and since that time, I am experiencing a very, very slow launch of the application--sometimes taking as long as 10 minutes to completely load.  My computer is well within the stated requirements for running the program, I have a good and stable high speed connection, and I have done everything suggested on this link and others, even going as far a deleting the program from my computer and reinstalling.  The program will eventually load, but as stated, it often takes up to 10 minutes once I click on the shortcut and the "new" Fusion splash screams appears.  I am running a Widows 10 machine with 8 GB RAM and 64 bit OS, Intel Core 3.2 GHz processor.

[RajkumarIlanchelian]

@everettwcaudle Can you please run a quick test? Disconnect internet and launch Fusion. How long does it take to launch Fusion? 

[everettwcaudle · Accepted solution]

Sorry for the delay.

Started this morning offline (airplane mode with no Wi-Fi) and program took about 1 min 15 sec to get to warning screen re not being connected.  I acknowledged the warning and it opened up fully off line pretty quickly.

Closed out F360, turned Wi-Fi back on and it loaded in under 30 seconds with Wi-Fi enabled.

Not sure why the difference after this, but it seems to have, for now, fixed the situation.  As noted in OP, was taking up to 10 minutes to load previously.  Will re-post if condition reapers.    Thanks for the help @RajkumarIlanchelian 

[RajkumarIlanchelian]

@everettwcaudle Glad to know that it is working now. Often times these delays could be fixed with a restart of network. Let us know if you hit this problem again.