Unsupported probe-on command
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
I'm trying to have fusion probe the top of a part while its in the machine. I'm trying to use inspect surface so I can see how much see how much more stock I have to remove. When I post it I get a failed message. I have used the probe WCS feature alot. I do have the extension to use this feature.
doosan dnm5700
This is the error message
Information: Configuration: Doosan 3/5-axis VMC
Information: Vendor: Doosan
Information: Posting intermediate data to 'G:\1.nc'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Thursday, November 3, 2022 7:48:25 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.5911.0
Configuration path: C:/Users/mark/AppData/Local/Autodesk/Autodesk Fusion 360/4TW2YAT3RDNE9B54/W.login/M/D20191111236982456/CAMPosts/DOOSAN VMC.cps
Security level: 1000
Include paths: C:/Users/mark/AppData/Local/Autodesk/Autodesk Fusion 360/4TW2YAT3RDNE9B54/W.login/M/D20191111236982456/CAMPosts
Configuration modification date: Tuesday, April 12, 2022 11:09:53 AM
Output path: G:\1.nc
Checksum of intermediate NC data: aaba99853053252b67d367d0c0bc9726
Checksum of configuration: 2805c1349bfb9bb7d7603a980c31bd1c
Vendor url: http://www.doosanmachinetools.com
Legal: Copyright (C) 2012-2022 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.14567
...
###############################################################################
Error: Unsupported probe-on command.
Error in operation: 'Inspect2'
Failed while processing onCommand() for record 263.
###############################################################################
Error: Failed to execute configuration.
Stop time: Thursday, November 3, 2022 7:48:25 PM
Post processing failed.
