Unable to 3d sketch
While in a 3D sketch and in an isometric view, can you capture your entire Fusion 360 screen and post it?
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You need to enable 3d sketch before selecting a sketch tool, if you have a sketch tool selected first you don't get the 3d axis.
If you enable 3d sketch then select the line tool for example you should get this.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
When you are in the mode, you are showing in the screen capture with the line command active, go up to the View Cube and hover your mouse cursor over it. The hold down your left mouse button to move the view off of the plane you are currently showing. You should see your other axis on your 3D sketch origin.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
.png){kind=link}