Trouble converting fusion file to DXF

[13120067]

I have made a design on fusion and want to export it to a format that is compatible to coreldraw as my vendors machine can only read cdr or dxf file. When I export to dxf however, there were some extra lines that were not part of my fusion design that suddenly appeared. What do I do ? Help please 🙏🏼 

[Warmingup1953]

Can you share your Fusion file?

[13120067]

This is the files

[Warmingup1953]

Any reason these lines are here?

[MRWakefield]

There are a few ways to do this:

• Remove any unnecessary geometry that isn't required (like @Warmingup1953 has highlighted) and save the sketch as DXF.
• Create a new sketch, project the body and save this sketch as DXF.
  
  
  
  
• Create 2D drawings from the models at 1:1 scale and export these as DXF.
  

Hope this helps.

[HughesTooling]

DXFer might help as it can export faces to a 2d DXF file.

[davebYYPCU]

DXFer might help as it can export faces to a 2d DXF file, without any new Fusion sketches.

[MRWakefield]

---

@HughesTooling wrote:

DXFer might help as it can export faces to a 2d DXF file.

---

Good suggestion but I don't think it can be used in this case as there's a radius at the bottom: