title block editing, drawing sheet update

[thereseEHZU6]

i know there was just an update, and a break line is a great asset to our drawing environment....however...... my design team makes drawing sets that can be made of 10 upwards sheets and go through a proofing and editing process before they are published for our team on the fabrication floor.  i currently have a few drawing templates in place to make it easy for our designers to use and edit the attributes as they begin a drawing set.  the major issue comes along when we need to make a change to our attributes, such as the date of publication changing, a spelling error or other specifics, and that can only be updated one sheet at a time.  i have tried to experiment with a work around but nothing that really keeps things simple and streamlined is available.  is there a tool i can be made aware of?  or is this a problem that can be looked into being addressed in a future (near future) update?  

[jodom4]

@ClintBrown3D , can you offer some insight?

[ClintBrown3D]

Hi @thereseEHZU6 

Thanks for the feedback, we're working on an update to the title blocks. Have a look at the public roadmap here: https://app.mural.co/t/timerahart2/m/timerahart2/1475171276107/0945259b7c22117012173ea2be3c9151fec1f...

I'd love to spend some time understanding your specific use case. If you're up for it, here's a link to my calendar, you can set up a meeting with me and we go over your requirement on a zoom call.

Kind Regards

[thereseEHZU6 · Accepted solution]

I would definitely make some time to give you some feedback. I need to make sure of some things with my superior in the morning and then I can take a look at that calendar and pick a potential time for a discussion.

I appreciate the time and concern. It will be extremely beneficial to our workflow to continue to see streamlined development of the drawings portion of Fusion 360. We lean on in more and more to get comprehensive and accurate information to our team on the fabrication floor and our vendors.

Thanks and look for my update on the scheduling tomorrow.

Therese (Terez)

[rohanQRTJ]

I can't able to edit and platform  it this drawing please resolve its

[rohanQRTJ]

and not able edit this CAD model

[g-andresen]

Hi,

Imported assemblies (chain symbol) can only be edited by breaking the links (right click > break link) or editing them at their origin.

Günther

Since this is a new topic you should also start a new thread.