Sketch: All slots should be fully constrained but Fusion's displaying some as unconstrained + other weirdness.

[FrodoLoggins]

So I have a sketch and the below 3 slots are displayed with blue lines meaning they are unconstrained:

But I've ripped the sketch up a few times and tried applying every dimension/constraint I can. They should be constrained.

What's weird is [as shown in the below video] if I remove the 5mm dim and then reapply it I get 5 unconstrained slots:

Before deleting 5mm dim:

After deleting the 5mm dim and then reapplying the 5mm dim now 5 slots are unconstrained:

All I did was delete a dimension and dimensioned the 5mm line again. Surely that wouldn't turn contrained slots into unconstrained slots?

I'm assuming the sketch is fully constrained and there's just some wonkiness going on?

[sameer_babarNJS6C · Accepted solution]

 @FrodoLoggins  Sorry for the inconvenience caused & Thank you for sharing the file with us . We could reproduce the issue at our end with file provided by you, it is likely due to incorrect FCA status but our team will analyse it further more.

We have logged an issue for it & we are looking for the solution .

"If you find my answer solved your question, please select the Accept Solution icon"

Thanks,
Sameer Babar.
Autodesk Fusion 360 Team

[P-BvanWyk]

Good day @FrodoLoggins,

Have you tried removing all but one, constraining the sketch, and then using the pattern command?

[TheCADWhisperer]

@FrodoLoggins 

I would pattern features or bodies rather than sketch elements.

How will this be manufactured with multiple bodies occupying the same space (interference)?

[FrodoLoggins]

That's how the customer wanted it originally but I just wanted to know if the issue was PEBCAK or Fusion.