Saving as mesh from top level produces low refinement meshes

[dsk001_3d]

I have noticed an issue where if you right click on the top item in the browser and select to save as a mesh, the refinement is much lower than than the refinement selected. The high value exports a low mesh and a low mesh produces a mesh with so little triangles you lose dimensions and details.

If you instead right click on a component with all the bodies in it and select save as mesh you get a much higher quality mesh.

The same model saved from the top has about 3x less triangles than saved from a component.

I have attached some screenshots below so it can be more clear what I am referring to. The top 2 are right clicking on top and saving as mesh and the bottom 2 are saving from component.

save from component

component preview

 

[g-andresen]

Hi,

check and edit the Refinement Options

günther

[dsk001_3d]

In the screen shot you can see they are both set to high.

[g-andresen]

Hi,

try!

günther

[dsk001_3d]

In your video you are right clicking on the component my issue is when right clicking all the way at the top. This is a good workaround but the bug should still be looked at by the dev team.

[petzon]

Thanks, you really saved my day, struggled a lot with a low res on a mesh, saving on body level solved the problem