public link not working

[Engisign]

Hello

I've created a duplicate of a file by "save as". The primary file shared link is ok, the new one I've modified and it's shared link not loading. See attached image to see where I stack. Any suggestions please?

[Rushikesh.kadam]

@Engisign can you try to generate the link in a web browser using Fusion Team? Below are some posts to help out:

1. https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Sha...
2. https://forums.autodesk.com/t5/fusion-360-design-validate/share-public-link-not-working/td-p/7879032
3. https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Gen...

---------------------------------------------------------------------------------------------------------------------------

If my reply was helpful, please click the "Accept as Solution" button. It helps others get the answer quickly! "Like" is always welcomed

[Engisign]

Sorry, but these didn't solve the issue for me.

[sunil.patilQCZZK]

Follow below steps:

1. Make small changes (Like Going to sketch and Exit the sketch)
2. Save the file.
3. Close and Re-open the file.
4. Try sharing public link.

If my reply was helpful, please click the "Accept as Solution" button. It helps others get the answer quickly! "Like" is always welcomed

Sunil Patil,

Technical support specialist Fusion 360,

Autodesk Inc.

[BIMETI]

Have the same issue all our team can't use public share.

[Rio31]

I have the same issue, I can't create a public link for my design. I tried all the suggestions mentionned above, I close and restart F360 but nothing worked. I'm on Windows 11

Thank you for help