parallel splines
To achieve your layout, I think if may be easier to sketch a center line splice and then offset it twice, one to each side. This will give you a spline sides that are all parallel from the beginning. I may be missing your objective but from what I see and read this is what you want to do.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I am not sure what you need besides the basic sketch commands. I have added a video of what I did, maybe it will help. If you need good tutorials to start learning Fusion 360 in general, the self guided tutorials are a good place.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
If my Forum post solved your question, please select the "Accept Solution" icon to do three things. First it allows others to find a solution to a similar question, two, it closes the Forum post and last, it acknowledges that you accept the solution given. If you need further help, please ask. If you like to read why "Accept Solutions are important, take a look at this webpage.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
.png){kind=link}