Not longer possible to 3D print directly from Fusion 360 to Cura

[uabtorw]

Hi,

After last update the possiblity to print directly to CURA seems to have disapeared. Dont know if it is due to update of Fusion 360 (2.0.16490 x86_64) or CURA (5.4.0).

Early it worked seemless, just to choose 3D Print (and choose CURA as optional). Now I have to export to STL file, and then print.

Anyone that got a clue of what has happened?

Tor

[g-andresen]

Hi,

The problem occurs again and again when there are new versions.
Add the new Cura version via the print dialog.
Otherwise, there are various reports on the forum Cura Print dialog.

günther

[jhackney1972]

Take a look at this Forum post.

[uabtorw]

Hi G-Andresen and John Hackney and thanks for ideas here.

I have added exactly as was done earlier, but now it seems as it has decided not to start the EXE file from CURA.

When having 5.3.X it was working fine.

So, now I wonder if there is something new that I have to do within Fusion 360.

Its a bit anoying when it suddenly stops to work.

Best

Tor

[jhackney1972 · Accepted solution]

If you tried to use the EXE you indicate in your screen capture, you picked the wrong one.  You want to select UltiMaker-Cura.exe.  I have installed the latest version 5.4.0 and using the indicated exe as the path for the custom application in Fusion 360, it works like a charm.

[uabtorw]

Ouch!!

I feel a bit stupid here, you have to read before marking one...

Tor