Name a dimension

[jumpingryan]

When I dimension a sketch if comes with a name like "d1"

Is there any way to quickly click on the dimension and name it. Having to go to parmeters and type "d1" and then close the window.

[HughesTooling]

When you create a dimension you can enter something  like name = 10.

If you have already created the dimension and you want to name it there's a bit of a problem where this only works if you change the dimension size.

So if you have an existing dimension of 100mm and you type Name = 100mm it will not rename the parameter but if you enter Name = 99mm it will rename the existing dimension.

@Phil.E This bug seems to have been around for a long time, is it logged OK?

[Phil.E]

Thanks, looking into it. I've asked the sketch team to respond.

It only happens with sketch dimensions. Solid commands like extrude do not have this issue.

[sameer_babarNJS6C]

Hi,

Sorry for the inconvenience caused . We can reproduce the issue as mentioned in above discussion.

We have logged an issue(FUS-162106) for it & our team is looking for the solution .

Thanks,
Sameer Babar.
Autodesk Fusion Team