Lost an edge from an extruded plane
You will probably need to attach your model to allow the Forum users to troubleshoot your issue. Please attach your file(s).
If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You sketches are really in bad shape, not constrained in place or in themselves. This is part of the reason you lost your edges. I did not attempt to correct your original sketch, I simple created a new one to give you the edges you were missing. If you do not like my edge, you can modify the thickness and height of it using the indicated sketch.
Model is attached.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
