Looking for post processor for GoFabCNC plasma table

[mikenova531]

I have a Gofabcnc Plasma table and have used fusion for many years. I am looking for a post processor that will work with this machine. The company has a post on their website but it is for sheetcam. I have used sheetcam to generate code for the machine but I am more used to fusion so looking to use the CAM side of fusion more. Any help is greatly appreciated. I attached the sheetcam post and a sample gcode file. 

[serge.quiblier]

Hi @mikenova531 

you can normally find our posts here :

https://cam.autodesk.com/hsmposts?

But we have not created a post for that machine.

Somebody on the forum may help you, or you can eventually work with one of our partner:

Given our partners can provide more localized support, we would encourage you to investigate the partners in your area, which can be done through our Services Marketplace.
https://customersuccess.autodesk.com/partners/search?search=post%20processor&locations[]=detect

Regards

______________________________________________________________

If my post answers your question, please click the "Accept Solution" button. This helps everyone find answers more quickly!