Iges file not opend

[IDIMITRIOUD883D]

I 'm trying to open an .igs file that i used to able earlier but is not possible now .The file is not damaged and it can be opened in other cad program. The file can be opend only when i change it to .dxf. 

Thank you 

Best regards

[RajkumarIlanchelian]

@IDIMITRIOUD883D Is this specific to only this one iges file or ANY files that you have? Also, would it be possible to share this file here? 

[IDIMITRIOUD883D]

When i tried to upload it here, i received the msg "The file type (.igs) is not supported" see below. So i send it as a .txt file.

Thank you 

[RajkumarIlanchelian]

You can zip and attach it here too. 

[IDIMITRIOUD883D]

I also send this .jpg from IGS viewer.

[IDIMITRIOUD883D]

Ok i sent the .rar file.

Thank you again

Best Regards

[IDIMITRIOUD883D]

I tried some others with the same results.

[jhackney1972 · Accepted solution]

I downloaded your RAR file, expanded it and opened it in Autodesk Inventor.  The file opens just fine in Fusion 360 as well.  The problem I see is the file is empty, there is nothing in it.

[TrippyLighting · Accepted solution]

Fusion 360 cannot do anything with wireframe geometry (curves). It only imports 3D geometry (surfaces or solids).

That's likely the reason why DXF seems to work, yet when @jhackney1972 can open the .igs file, it is empty in Fusion 360.

[IDIMITRIOUD883D · Accepted solution]

This type of file with the same data was working in earlier versions. I mean iges file is iges file and the code for line is still the same (110). Also coordinates are (x,y,z) .  Perhaps files like this are not permitted any more?

Thank you.