Hello! I would greatly appreciate advice on how to create the ridges shown on the model below. They are on the inside and the outside of this tapered cup.
Sorry if this is a repeat. I posted it earlier but my post seems to have disappeared.
How to add details to a a tapered surface
Accepted solution
First create the main body using a tapered extrude. Then create sketches on the faces for one of the ribs and loft.
After the loft pattern the rib around the body. In your image the ribs don't seem to be tapered so the gap between is bigger at the top.
Then repeat for the inside. See attached file.
Then use a revolve to add the chamfer.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
