Help Joint Conlict
Accepted solution
The forum users cannot do much to help without your model. Please attach it. Go to File -> Export and save it to a location on your computer. Then attach it to your post as show below.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Accepted solution
You have not posted your model nor have you received any help, why post your question as Solved?
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Accepted solution
@Anonymous wrote:
I have a TF2 sentry gun I've been modeling and when I tried to add one particular joint, it caused a conflict!
Ok, now that I have the model, you have failed to specify the one particular joint you are trying to apply. So give us a hint using a Screencast or some screen captures to define which joint(s) you are talking about.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Accepted solution
I did not hear back from you so I went ahead and constrained everything I saw that was loose. My model is attached with a different name.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.