Fusion360 CAM simulation not working

[JJackrabbit]

Hi

I've got some big issues with Fusion360 and CAM simulation.

It always worked perfect without issues. 

I don't know what triggered this issue but I'm unable to perform a cam simulation.

For simple 2D operations it works slow but fine.

But when doing 3 axis or 4 axis work it just freezes 

I think it has something to do with the stock calculation. When I turn off "stock" in the simulation dialog I can atleast see my toolpath and the cutter moving in the part. I just don't see stock. 

When I turn on stock Fusion freezes and gives me maybe 2 seconds of simulation before freezing again.

I've already reinstalled Fusion without any effect

ps: I think toolpath generation takes longer than normal. 

Running a Windows 11 Asus TUF Gaing FX506 A15

AMD Ryzen 7 4800H

GeForce RTX 2060

16GB RAM

SSD

[seth.madore]

What is your Accuracy set to?

Your computer specs are better than mine, so I don't think it's hardware related

If you're trying to simulate while In Process Stock is calculating, there is some definite lag. Is that the case? 

[JJackrabbit]

Hi Seth,

Ow it was that easy?
The accuracy was maxed out. I lowered it and I can simulate CAM now 🙂

Thanks for the quick reply and help

Have a nice day