Fusion 360 post processing for Shop Sabre plasma

[Anonymous]

New to Fusion 360 and Shop Sabre, and have reviewed the material and videos.  I have the shop sabre post, and it has created the correct .tap file.  The issue is when I run the file on the machine it goes down and makes a very small cut ant then stops with "Error-multiple commands" on the shop sabre software.  I have also used the win cnc post and same issue.  Not sure if the post is wrong, or something else.  It shows the toolpath when I simulate in 360, and I'm not an expert in G-Code, but it looks like it posts a complete program.  I feel it is the post, but could be something I'm doing.

[seth.madore · Accepted solution]

Doing a quick bit of Google searching, it seems that the ShopSabre will only permit one G code per line. With Cutter Compensation active, it's posting out two G codes: G1 G41 Xxx Yyy.

I suggest trying it with Computer Compensation and seeing if that cures it

[Anonymous]

Where do I select computer compensation?  In the tool selection?

[seth.madore · Accepted solution]

 

[Anonymous]

I found it right after your first response.  That did it.  Thanks for your help....