Extrusion Error - No Target Body

[john_a_sparksss]

I have an SVG imported, worked all of the extrusion features that I need.  There is one letter in all of the file that will not extrude.  It errors as No Target Body.  I can select the letter and it highlights as all the others have to execute the extrusion feature. But it will not complete the function.  Any thoughts on  how to validate the geometry so I can get the letter to extrude.

[g-andresen]

Hi,

please share the file

File > Export > save as f3d on local drive > attach to post

günbther

[john_a_sparksss]

As requested. Any help would be appreciated. See attached

[john_a_sparksss]

As requested 🙂  See attached.  Any help would be GREATLY appreciated

[john_a_sparksss]

See attached in post below

[jhackney1972 · Accepted solution]

For some reason, you have Cut selected instead of Joint for that one letter.  Change it to Join and all is well.

[john_a_sparksss]

Thank you so much!!! All set.  Not sure why that was selected as such, but all good now!!!!