Error: CAM kernel died unexpectedly.

[j2]

Hi,

generating adaptive toolpaths I get very often the message "Error: CAM kernel died unexpectedly.". When I try a few times sometimes it works with the same operation, sometimes not. What can be the issue?

See https://a360.co/2L2SL7z

Regards ... Jörg

[masa.minohara]

Hi @j2,

Thank you for posting in the forum! I had a look at your design but did not see the error.

Have you edited the design since you posted about the issue?

[j2]

Hi Masa,

I fixed it by using pocket. But the problem still persists here: 

https://a360.co/2C2VcEo

Regards, Jörg

[masa.minohara]

Hi @j2,

Thank you for sharing the file with me! I still haven't found the root cause of the issue but I saw a similar issue in this forum thread. 

Are you on Mac or Windows?

[j2]

I do use the Mac Version of Fusion ....

[masa.minohara · Accepted solution]

Thank you for your response! I have logged the issue with the development team for further investigation. (CAM-12188)

I apologize for the inconvenience, and thank you for bringing this to our attention!